Multiple Network Redundancy enhanced a device/network reliability & efficiency without needing to consider additional cost. It can be implemented on any devices as long as the communication driver is available. The redundancy can be achieved on physical device level or solely on network level when a device with multiple ports is available. IntegraXor Network Redundancy will greatly simplify and speedup the configuration and programming work on Project Editor, whatever need to be configured multiple times will be reduced to only once.

Only one tag will exist in system layer although the tag value can be polled from different channel or devices when it's configured under the same series of device array. This mean user do not need to bother which channel is available but to use the single tag as if it's from one device/channel.

In this configuration, two identical physical device is needed. They must perform the same function so IntegraXor will virtually treat it as only one device. Only one set of tags need to be entered, and the server will poll from any available device at any one time.

This configuration requires less investment on hardware than the previous configuration as it only improves the network links. The pre-requisite for this configuration is the device must have at least 2 or more communication ports, so that the physical cable can be routed via different channel, and the server will only poll via one channel at any one time.